LYCOPRO BABY WAX HEATER

Remove lid and fill the metal insert(s) with the hot or strip wax of your choice. DO NOT put wax directly into the heating chamber, only in the removable inserts.

Plug into power point and turn regulator dial clockwise to switch heater on.

To speed up hot wax heating, first turn the dial to 5 for at least 30 minutes, depending on how much wax is in the insert. When relatively melted, reduce heat and allow wax to cool to working temperature. For strip wax, heat on 5 for about 15 minutes, then reduce heat slightly to maintain working temperature.
NOTE 1: As all wax melting points vary, it is best to determine the optimal temperature setting for the wax you are using. For hot wax, the working temperature is around 3 – 4 on the dial. For strip wax, the working temperature is around 5 on the dial. The actual wax temperature is a few degrees lower, due to using an insert.
NOTE 2: LYCON Strip Wax jars can be melted in a microwave then poured into a removable insert for use, which can be reheated and added to as required.

To increase temperature, move regulator dial clockwise.

To reduce temperature, move regulator dial anti-clockwise.

When wax and insert are hot, remove insert from heater carefully with a protective cloth.